From the office towers on Grey Street to the medical suites around the Mater and the hospitality fit-outs by South Bank, South Brisbane runs on its cabling. We design, install and certify the data, fibre and network cabling 4101 businesses depend on — one run at a time, properly documented.
Prefer to talk? Call Chris — 0412 853 618
A handful of data points or a full-floor fit-out in a Grey Street tower — send your details and Chris will come back with straight advice and a fixed price. Prefer to talk? Call 0412 853 618. No pushy sales, just solid work.



South Brisbane packs an unusual amount into one postcode — the Grey Street and Melbourne Street office towers, the cultural and hospitality strip around South Bank, the Mater hospital and its surrounding medical and allied-health suites, and a dense band of high-rise residential and mixed-use strata. Every one of those runs on structured cabling, and Unified Network Solutions has spent 15+ years installing and certifying it across Brisbane and the inner south.
We're a southside-based team, so South Brisbane is genuinely local for us — usually around 25 minutes up the M1 — which matters when a fault needs a same-day look or a fit-out needs us back on site at short notice. We handle everything from a single added data point in a West End studio to a full-floor commercial fit-out with backbone and a comms-room build in a 4101 tower.
Because we come from an IT and networking background, we plan cabling around how your network actually behaves — PoE budgets for phones and access points, VLAN separation, and bandwidth headroom for growth — not just a cable count. The result is infrastructure your IT team or MSP can manage from day one, with the documentation building managers and body corporates in South Brisbane expect.
The full physical layer — one organised, certified cabling platform behind every system in the building.
Structured data cabling and Cat6/Cat6a for offices, medical suites and retail — terminated to TIA-568B and Fluke-certified, run by run.
Single-mode and multi-mode fibre backbone between floors and buildings — fusion spliced, OTDR tested, the right call for multi-storey 4101 towers.
WiFi cabling and access point installation for offices, venues and common areas — cabled properly so coverage holds up under load.
NBN cabling, lead-in and hand-off for South Brisbane business premises — coordinated with the carrier and terminated into your comms room.
Racks, patch panels and comms-room builds to a consistent layout — plus audits and remediation of disorganised inner-city comms rooms.
Fluke DSX certification, cable schedules, as-builts and labelling to AS/CA S009 — the paper trail landlords and strata managers ask for.
The 4101 precinct is mostly multi-storey, and that shapes every cabling job. In the Grey Street and Melbourne Street commercial towers, the work is as much about riser access, after-hours scheduling and building coordination as it is about the cable itself — pulling backbone up a riser through occupied, tenanted floors during business hours simply isn't on.
We schedule riser and floor work after-hours or weekends, book docks and access with building management, and keep the comms room to a standard that passes inspection. For the area's high-rise strata, we handle common-area and riser cabling with the documentation body corporates need on file.


South Brisbane isn't all corporate floors. Around the Mater precinct we cable medical and allied-health suites where reliability and clean documentation are non-negotiable, and near South Bank and West End we wire hospitality venues, studios and creative offices where the cabling has to disappear into the fit-out.
Different building, same approach: plan voice and data together, cable for the systems that ride on top — VoIP, IP CCTV, access control, AV — and certify every run so there's a baseline if anything ever needs fault-finding.
Any work on customer cabling in Australia must be done by an ACMA-registered cabler — UNS holds Open Cabler Registration #42489 — and in commercial buildings the compliance paper trail matters as much as the cable.
AS/CA S009 — the wiring rules for customer cabling: separation, bonding, bend radius, fire-stopping and labelling. Non-compliant work can void insurance and creates faults that are expensive to find in a multi-storey building.
Fluke DSX certification — every run tested and proven to its category, with results in your handover pack. It's the baseline landlords, body corporates and regulated medical tenants in 4101 expect.
Full as-built documentation — cable schedules, diagrams, labelling records and photos, so your IT team or MSP can manage the infrastructure from the day the floor opens.
We come to your South Brisbane site, check riser and ceiling access, building rules and after-hours requirements, and scope the work accurately.
A detailed scope with a fixed price — components, labour, after-hours and building coordination broken out. No hourly rates, no surprises.
Licensed, insured technicians work around your operations — after-hours in occupied towers where needed. Every run Fluke-tested and certified.
As-builts, test reports, cable schedules and labelling records handed over — ready for your IT team, MSP or building manager.
Not just installers — we come from an IT background, so we understand the networks that depend on the infrastructure we build.
Southside-based — South Brisbane in around 25 minutes up the M1, so same-day fault visits and short-notice fit-out returns are realistic, not a maybe.
We work around tenanted towers — after-hours and weekend riser and floor work, with building access and docks coordinated up front.
ACMA Open Cabler #42489, fully insured, every run certified to AS/CA S009 with documentation building managers expect.
“We needed a floor re-cabled in a Grey Street building without upsetting the other tenants. They did the whole lot after hours, the building manager had no complaints, and the comms room came back looking better than it went in. Easy to deal with.”
Yes — South Brisbane (4101) is one of our core service areas. We're a southside-based team, so we reach the South Brisbane, South Bank and West End precinct in around 25 minutes straight up the M1, and we regularly cable offices, medical suites, hospitality venues and strata buildings throughout 4101. Call Chris on 0412 853 618.
Yes, and for the Grey Street and Melbourne Street commercial towers it's often the only practical option. Pulling cable through occupied, tenanted floors during business hours disrupts everyone, so we schedule riser and floor work after-hours or on weekends, coordinate building access and dock bookings with management, and keep the comms room tidy enough to pass a building inspection.
Most office work runs $150–$250 per data point — installed, terminated, Fluke-tested and certified — but the real number depends on cable count, Cat6 vs Cat6a, riser access in multi-storey buildings, and after-hours requirements. We quote fixed-price after a free site survey, so there are no hourly rates or surprises. Call 0412 853 618 for a South Brisbane quote.
A real cross-section of the 4101 precinct: corporate offices in the Grey Street towers, medical and allied-health suites around the Mater hospital precinct, hospitality and creative fit-outs near South Bank and West End, and common-area and riser cabling for the area's high-rise strata buildings. From a single data point to a full-floor fitout.
The whole physical layer. On a South Brisbane job we'll handle structured Cat6/Cat6a, fibre backbone between floors, WiFi access point cabling, NBN lead-in and hand-off, server racks and comms-room builds — all over one organised cabling platform, all certified and documented.
Yes. We hold ACMA Open Cabler Registration #42489, carry full insurance, and every run is certified to AS/CA S009 with Fluke DSX test results in your handover pack — the paper trail building managers, landlords and body corporates in South Brisbane towers expect.
Absolutely. We're a white-label field partner for plenty of Brisbane IT companies and MSPs — we deliver the physical cabling, testing and documentation in South Brisbane while your team handles configuration and the client relationship.
All of inner Brisbane and the southside — West End, Woolloongabba, Highgate Hill, Kangaroo Point, the CBD across the river, plus Logan, Redlands and the wider South East Queensland region.
We cable businesses right across the 4101 precinct — South Bank, the Grey Street and Melbourne Street towers, the Mater medical precinct — and through the surrounding inner south: West End, Woolloongabba, Highgate Hill, Kangaroo Point and the Brisbane CBD across the river. Site surveys are free, quotes are fixed-price, and every job ends with certification and documentation in your hands. Outside the inner city, we also cover Brisbane, Logan, Redlands and the wider South East Queensland region.
Tell us about the site — tower floor, medical suite, venue or strata — and we'll scope it on site and come back with a fixed price. Installed, certified and documented by a registered cabler.
Call 0412 853 618 Get a Quote Online