Call Chris — 0412 853 618
Tell us what you need. We'll visit the site, scope the job properly, and give you a fixed price. We service Brisbane, Redlands, Moreton Bay, Logan, Ipswich, Gold Coast, Sunshine Coast, and Toowoomba.
As an ACMA-registered Open Cabler (License #42489), we deliver network cabling and network installation services that meet Australian standards and come with full certification and documentation. Whether you need structured cabling for a new office fitout, WiFi access point installation, fibre optic backbone cabling, or emergency network repairs, our Brisbane-based team has you covered.
We work directly with businesses across South East Queensland and also provide white-label services for IT companies and MSPs who need reliable physical layer support for their clients. Every cable run is planned, installed, tested, labelled, and documented — because we understand that a properly built cabling system is the foundation of a reliable network.
Our network cabling services cover everything from structured cabling and data cabling through to cable certification, CCTV cabling, NBN carrier management, server rack installations, and commercial audio systems. Whether you need a single data point added to an existing office or a complete multi-level building backbone with fibre risers and comms room fitouts, we scope it properly, quote it fixed-price, and deliver it certified.
Most commercial data cabling installations in Brisbane today use Cat6 or Cat6A cable, depending on the performance requirements and budget. Cat6 supports up to 10 Gbps over short distances and is suitable for most office environments, while Cat6A provides full 10 Gbps over 100-metre runs and is the better choice for healthcare, education, and high-density environments where future bandwidth demands are likely to increase. We help you choose the right cable grade for your specific requirements and install it to manufacturer specifications.
Our network cabling work extends well beyond standard office installations. We regularly handle network infrastructure for multi-level commercial buildings, warehouses, medical centres, schools, retail fitouts, and strata properties throughout Brisbane, the Gold Coast, and the Sunshine Coast. Whether you need a single data point added to an existing network or a full structured cabling system designed and installed from scratch, we bring the same level of planning, testing, and documentation to every job.
We also specialise in comms room fitouts, server rack installations, and cable management for businesses that need their network infrastructure organised, labelled, and future-proofed. If your existing network cabling is undocumented, messy, or underperforming, we can audit the current setup, recommend improvements, and implement a solution that gives your IT team confidence in the physical layer. Our goal is to deliver network infrastructure that works reliably today and scales easily when your business grows.
From a single data point to a full building cabling backbone — installed, tested, certified, and documented. We handle the physical layer so your IT team can focus on the rest.
When your business is offline, every minute counts. Our emergency response team provides rapid on-site fault finding, repairs, and restoration across Brisbane — including after-hours and weekends.
Every cabling project in Brisbane follows a structured process designed to deliver reliable results the first time. From initial consultation through to handover, we keep you informed at every stage.
Whether we are installing a handful of data points in a small office or running hundreds of cables through a multi-storey commercial building, the process remains the same. This consistency is what separates professional network cabling from the kind of rushed work that leads to intermittent network faults and expensive rework down the track.
We visit your site, assess existing infrastructure, identify cable pathways, and document exactly what is needed. You receive a detailed scope of works and a fixed-price quote before any work begins, so there are no surprises.
Our team installs structured cabling to Australian standards, including Cat5e, Cat6, and Cat6A cable runs. Every cable is routed through appropriate pathways — ceiling spaces, risers, conduit, and cable trays — with proper bend radius and separation from electrical interference. We coordinate with builders, electricians, and facility managers to minimise disruption and ensure the installation integrates cleanly with the existing building infrastructure.
All cables are terminated to TIA-568B standards, then tested with a Fluke DSX CableAnalyzer to verify performance. You receive certified test results for every cable run — not just a continuity check, but full channel or permanent link certification.
Every project includes labelling, as-built diagrams, cable schedules, test reports, and photos of concealed work. Your IT team or managed service provider receives everything they need to manage and maintain the network going forward. We also walk you through the documentation at handover so you understand what was installed and how to reference it for future changes or troubleshooting.
We started in IT. Networks, hardware, software, troubleshooting. Then we moved into the physical infrastructure that makes it all work. That means we actually understand what we're installing and why it matters to your business. More on why Brisbane businesses choose UNS.
✓ Full Compliance — ACMA #42489VLANs, PoE requirements, bandwidth planning, switch stacking. Cable runs planned for your network design, not just the shortest path.
As-built diagrams, test results, cable schedules, labelling records, and photos of concealed work. Your IT team can use it.
We work as the physical layer for IT companies. They handle configuration and support, we handle cabling, cameras, and hardware. Their clients never know we exist.
I'm Chris Hughes — I run Unified Network Solutions, and I'm the one who picks up when you call. I came up through IT, not the trades, so I don't just pull cable and hope it works — I understand how your network actually runs, from the patch panel through to the switch. I'm a registered ACMA Open Cabler (#42489) with 15+ years across Brisbane's commercial sites, and every job we do is planned, Fluke-tested and documented. You deal with me directly — not a call centre, not a subbie I've never met.
Not all network cabling companies in Brisbane deliver the same quality. The difference between a reliable network and one plagued by intermittent faults often comes down to who installed the cables. Here is what to check before hiring a network cabler for your next project.
Open Cabler registration is the minimum standard required by ACMA for anyone installing telecommunications cabling in Australia. Ask for their registration number and verify it. An unregistered installer cannot legally connect cabling to the telecommunications network, and their work may void your insurance or fail compliance audits.
Certified cable testing is non-negotiable for commercial installations. A proper installer will test every cable run with a calibrated Fluke or equivalent tester and provide you with the results. If they only offer a continuity check or cannot produce test reports, that is a red flag.
Documentation and labelling should be standard on every project. Ask what handover documentation is included. At a minimum, you should receive cable schedules, labelling records, and as-built diagrams. Without these, your IT team will struggle to troubleshoot issues or plan future expansions.
Finally, look for a network cabler who understands networking, not just cabling. A network cabler with IT experience will plan cable runs based on your network topology, VLAN requirements, and PoE budget — not just the shortest path from A to B. This is where Unified Network Solutions stands apart from traditional electrical or cabling contractors in Brisbane.
Choosing the right network cabler is an investment in the long-term reliability of your network. The cables installed today will carry your business data for the next ten to fifteen years, so it pays to get the installation right the first time. We are happy to provide references from previous commercial clients and examples of our documentation so you can see exactly what to expect before committing to a project.
Yes. We provide complete NBN installation and setup services across Brisbane and SEQ. This includes NTD relocation, modem configuration, internal cabling to your preferred location, and business-grade NBN Enterprise Ethernet connections. As registered Open Cablers, we can work on carrier infrastructure legally and safely.
Our data cabling installation service includes site survey, cable pathway planning, Cat6/Cat6A cable runs, data point installation, patch panel termination, full testing with Fluke certification, labelling, and as-built documentation. Every install meets Australian standards and comes with test reports your IT team can use.
Yes. We provide network switch installation, router and firewall mounting, and WiFi access point installation. We handle the physical installation, rack mounting, cabling, and power. Configuration can be done by us or your IT provider — we work either way.
Absolutely. We work as a telecommunications contractor and white-label partner for IT companies, MSPs, and integrators across Brisbane. We handle the physical layer — cabling, hardware installation, rack and stack — while you handle configuration and client relationships. Your clients never know we exist.
We provide commercial data cabling services across Brisbane and South East Queensland, including Brisbane CBD, Redlands, Moreton Bay, Logan, Ipswich, Gold Coast, Sunshine Coast, and Toowoomba. For larger projects, we can service regional Queensland by arrangement.
Data point installation costs vary based on cable run length, access difficulty, and quantity. A single data point in an accessible office typically ranges from $150-250 installed and tested. We provide fixed-price quotes after a site visit so there are no surprises. Volume discounts apply for office fitouts and larger projects.
“We're an MSP and brought UNS in on a white label basis for a client's cabling job. They turned up looking professional, communicated through us properly, and the client had no idea they weren't our own crew. That's exactly how it should work. We've used them twice more since.”
“UNS handled all the network side of our fitout — cabling, WiFi, the rack. The bit that stood out for me was how well they worked in with the builder and the sparky. No finger-pointing, no delays blamed on each other. We walked in on day one and everything just worked.”
“We moved a heap of desks around and ended up needing data points in places that didn't have them. UNS came in, got the data cabling sorted, and everything was actually labelled — which sounds basic but you'd be surprised. Our IT guy was very happy. He's usually not.”
Network cabling, network infrastructure, and IT infrastructure services for Queensland businesses. Open Cabler registered (License #42489).
Service Areas: Brisbane, Redlands, Moreton Bay, Logan, Ipswich, Gold Coast, Sunshine Coast, Toowoomba
© 2026 CKMC Holdings Pty Ltd T/A Unified Network Solutions. All rights reserved. | Open Cabler: 42489 | ABN: 83 651 795 890
Send Project Details Call 0412 853 618
Unified Network Solutions